SN74BCT29821NT
| Parameters | |
|---|---|
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Family | BCT/FBT |
| Current - Quiescent (Iq) | 10mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.048 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5.5pF |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T24 |
| Function | Standard |
| Qualification Status | Not Qualified |
SN74BCT29821NT Overview
The item is packaged in 24-DIP (0.300, 7.62mm)cases. It is included in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. Currently, the operating temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74BCTseries of FPGAs. You should not exceed 125MHzin its output frequency. D latch consists of 1 elements. There is 10mA quiescent consumption. A total of 24terminations have been recorded. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 5.5pF farads. This D flip flop belongs to the family of BCT/FBT. The RS flip flops belongs to FF/Latches base part number. It reaches the maximum supply voltage (Vsup) at 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. There are 5V power supplies attached to it. There are 2 ports embedded in the flip flops.
SN74BCT29821NT Features
Tube package
74BCT series
5V power supplies
SN74BCT29821NT Applications
There are a lot of Rochester Electronics, LLC SN74BCT29821NT Flip Flops applications.
- Circuit Design
- Automotive
- Common Clocks
- ESD protection
- Latch-up performance
- Shift registers
- Buffer registers
- Data Synchronizers
- Supports Live Insertion
- Storage Registers
