SN74BCT29825NT
| Parameters | |
|---|---|
| Input Capacitance | 5pF |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLE |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T24 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Family | BCT/FBT |
| Current - Quiescent (Iq) | 16mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
SN74BCT29825NT Overview
The package is in the form of 24-DIP (0.300, 7.62mm). The package Tubecontains it. Tri-State, Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. A temperature of 0°C~70°C TAis used in the operation. The type of this D latch is D-Type. JK flip flop is a part of the 74BCTseries of FPGAs. A frequency of 125MHzshould not be exceeded by its output. D latch consists of 1 elements. T flip flop consumes 16mA quiescent energy. There are 24 terminations,Power is provided by a 5V supply. Its input capacitance is 5pF farads. It is a member of the BCT/FBTfamily of D flip flop. 5.5Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.5V. There are 2 ports embedded in the flip flops. It is also characterized by WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLE.
SN74BCT29825NT Features
Tube package
74BCT series
SN74BCT29825NT Applications
There are a lot of Rochester Electronics, LLC SN74BCT29825NT Flip Flops applications.
- Safety Clamp
- Common Clocks
- Event Detectors
- Storage Registers
- Convert a momentary switch to a toggle switch
- Shift Registers
- QML qualified product
- Power down protection
- Control circuits
- 2 – Bit synchronous counter
