SN74BCT29843DWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74BCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH CLEAR AND PRESET |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT29843 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 6 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.048 A |
| Power Supply Current-Max (ICC) | 35mA |
| Number of Input Lines | 9 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74BCT29843DWE4 Overview
24-SOIC (0.295, 7.50mm Width) contains it. Packaged in the way of Tube. It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. It is 0°C~70°C at the operating temperature. The 74BCT series of FPGAs is the one this FPGA belongs to. An electronic part with 9 bits is designed. The device consists of 24 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74BCT29843. The device works with a voltage of 5V for its supply voltage. 24 pins are included. It is a member of the BCT/FBT family of electronic devices. With the design of the board, there are only 24 pins. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. 5.5V is the maximum supply voltage (Vsup). There are 5V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 4.5V. There are 9 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. In addition, WITH CLEAR AND PRESET characterize it. As its maximal power current (ICC) reaches 35mA, it is able to operate.
SN74BCT29843DWE4 Features
24-SOIC (0.295, 7.50mm Width) package
74BCT series
9 Bits
74BCT29843 family
24 pin count
24 pins
5V power supplies
SN74BCT29843DWE4 Applications
There are a lot of Texas Instruments SN74BCT29843DWE4 Latches applications.
- Pattern Generators
- Automotive Cluster
- Parallel Output
- Multi-line decoders
- Registers
- Frequency dividing
- Network Switches
- Control circuits
- General-Purpose Register
- Double bus register system
