SN74BCT29843DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH CLEAR AND PRESET |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT29843 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 6 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.048 A |
| Power Supply Current-Max (ICC) | 35mA |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74BCT29843DWR Overview
The package in which it is embedded is named 24-SOIC (0.295, 7.50mm Width). A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is used for operation. The 74BCT series is associated with this FPGA. There are 9 bits in this electronic part. This device has 24 terminations. There is no doubt that it belongs to the family 74BCT29843. The supply voltage of the device is 5V. 24 pins are included. It is a member of the BCT/FBT family of electronic devices. With the design of the board, there are only 24 pins. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. The device is powered by 5V power supplies. Based on its reliable performance, this device is suitable for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. A binary equivalent of the input line is generated by the 9 output lines. It consists of 1 elements. There are also other characteristics of it, such as WITH CLEAR AND PRESET. In order to operate properly, its maximum power current (ICC) should be 35mA.
SN74BCT29843DWR Features
24-SOIC (0.295, 7.50mm Width) package
74BCT series
9 Bits
74BCT29843 family
24 pin count
24 pins
5V power supplies
1 elements
SN74BCT29843DWR Applications
There are a lot of Texas Instruments SN74BCT29843DWR Latches applications.
- Meter applications
- Shift left with parallel loading
- Frequency
- Digital bus buffer
- Multistage ripple counting
- Accumulator Registers
- A/D and D/A conversion
- Automotive ADAS
- Up/down difference counting
- Double bus register system
