banner_page

SN74BCT29843NT

D-Type, Latch 4.5V~5.5V 9 Bits Tri-State Latches 74BCT Series 74BCT29843 20 Pins DUAL BICMOS 24-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74BCT29843NT
  • Package: 24-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 419
  • Description: D-Type, Latch 4.5V~5.5V 9 Bits Tri-State Latches 74BCT Series 74BCT29843 20 Pins DUAL BICMOS 24-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-DIP (0.300, 7.62mm)
Number of Pins 24
Weight 1.753503g
Operating Temperature 0°C~70°C
Packaging Tube
Series 74BCT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Additional Feature WITH CLEAR AND PRESET
Subcategory FF/Latches
Technology BICMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74BCT29843
Pin Count 20
Number of Outputs 9
Qualification Status Not Qualified
Output Type Tri-State
Circuit 9:9
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 9
Propagation Delay 8 ns
Turn On Delay Time 6 ns
Family BCT/FBT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 48mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.048 A
Power Supply Current-Max (ICC) 35mA
Independent Circuits 1
Height Seated (Max) 5.08mm
Width 7.62mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74BCT29843NT Overview


In the 24-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Packaged in the way of Tube. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. Through Hole is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The temperature at which the machine is operating is 0°C~70°C. There are a number of FPGAs in this series, including this one. With this electronic part, there are 9 bits. As far as this device is concerned, it has no terminations. The family it belongs to is 74BCT29843. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. There is a device in this electronic family called BCT/FBT. There are 24 pins on it. A Through Hole mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. Vsup reaches 5.5V as the maximum supply voltage. A total of 5V power supplies are needed to run it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. There are also other characteristics of it, such as WITH CLEAR AND PRESET. Maximum power supply (ICC) for its operation is 35mA.

SN74BCT29843NT Features


24-DIP (0.300, 7.62mm) package
74BCT series
9 Bits
74BCT29843 family
20 pin count
24 pins
5V power supplies

SN74BCT29843NT Applications


There are a lot of Texas Instruments SN74BCT29843NT Latches applications.

  • Parallel Input
  • Flip-flops
  • Automotive Body Electronics
  • Motor Drives
  • Ring counter
  • Display driver
  • Shift right with parallel loading
  • Shift left with parallel loading
  • Double bus register system
  • Up/down difference counting

Write a review

Note: HTML is not translated!
    Bad           Good