SN74BCT373DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 60mA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.2 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74BCT373DBRG4 Overview
In the 20-SSOP (0.209, 5.30mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the packaging method. It uses Tri-State as the output. This electrical device has Logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. There is a temperature of 0°C~70°C at which the system operates. In the 74BCT series, this FPGA is located. The electronic part in this image has 8 bits. This device has 20 terminations. 74BCT373 is its family. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. This electronic device belongs to the family of BCT/FBT. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. The part belongs to the FF/Latches subcategory. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. The device is powered by 5V power supplies. (Vsup) should be greater than 4.5V. It contains 8 input lines where electronic circuits are present. The reliability of this device makes it well suited to TAPE AND REEL. With 64mA, maximum design flexibility is ensured.
SN74BCT373DBRG4 Features
20-SSOP (0.209, 5.30mm Width) package
74BCT series
8 Bits
74BCT373 family
20 pin count
20 pins
5V power supplies
SN74BCT373DBRG4 Applications
There are a lot of Texas Instruments SN74BCT373DBRG4 Latches applications.
- Registers
- Multi-line decoders
- Counter timers
- Counter control
- Programmable binary
- Shift left register
- Relay
- Ring counter
- Control circuits
- Display
