SN74BCT373DWG4
| Parameters | |
|---|---|
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.2 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74BCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 60mA |
| Output Current | 64mA |
SN74BCT373DWG4 Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. This package has the format of Tube. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. This electronic part is mounted in the way of Surface Mount. There is no supply voltage for this device. There is 0°C~70°C operating temperature. In the 74BCT series, this FPGA is located. This electronic part is designed with 8 Bits. This device has been designed with 20 terminations available. The family 74BCT373 includes it. In order to operate it, the supply voltage must be 5V. It has 20 pins that makes it easy to use. This electronic device is categorized as a BCT/FBT electronic device. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports. In the subcategory FF/Latches, this part belongs. A total of 5V power supplies are needed to run it. It consists of 8 input lines from which an electronic circuit can be built. As the output current is 64mA, the design flexibility is maximum. High efficiency requires maintaining the supply voltage at 5V.
SN74BCT373DWG4 Features
20-SOIC (0.295, 7.50mm Width) package
74BCT series
8 Bits
74BCT373 family
20 pin count
20 pins
5V power supplies
SN74BCT373DWG4 Applications
There are a lot of Texas Instruments SN74BCT373DWG4 Latches applications.
- A/D and D/A conversion
- Up/down difference counting
- Four-bit storage with output enable
- Automotive HEV/EV Powertrain
- Registers
- Buffer/Storage Registers
- Hammer
- Shift Registers
- Synchronous frequency dividers
- Serial Output Data Queuing
