banner_page

SN74BCT373NSR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74BCT Series 74BCT373 20 Pins DUAL BICMOS 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74BCT373NSR
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 906
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74BCT Series 74BCT373 20 Pins DUAL BICMOS 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Weight 266.712314mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74BCT
JESD-609 Code e4
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology BICMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74BCT373
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 60mA
Output Current 64mA
Number of Bits 8
Propagation Delay 8.5 ns
Turn On Delay Time 6.2 ns
Family BCT/FBT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 15mA 64mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.064 A
Prop. Delay@Nom-Sup 9.5 ns
Number of Input Lines 8
Independent Circuits 1
Height Seated (Max) 2mm
Width 5.3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

SN74BCT373NSR Overview


The 20-SOIC (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the packaging method. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. It is 0°C~70°C at the operating temperature. It is a type of FPGA belonging to the 74BCT series. 8 Bits are used in the design of this electronic part. A device with this design has 20 terminations. The family it belongs to is 74BCT373. A 5V voltage supply is required for operation. There are 20 pins attached to it. It is part of the family of electronic devices called BCT/FBT. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. This part is included in FF/Latches. There is a maximum voltage supply (Vsup) that reaches 5.5V. 5V power supplies are needed to operate it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. There are 8 input lines in which electronic circuits are present. This device is well suited for TAPE AND REEL based on its reliable performance. The 64mA output current gives it maximum design flexibility.

SN74BCT373NSR Features


20-SOIC (0.209, 5.30mm Width) package
74BCT series
8 Bits
74BCT373 family
20 pin count
20 pins
5V power supplies

SN74BCT373NSR Applications


There are a lot of Texas Instruments SN74BCT373NSR Latches applications.

  • Instrumentation
  • Counter control
  • A/D converters
  • Counter timers
  • Ring counter
  • Parallel data synchronization
  • A/D and D/A conversion
  • Relay replacement
  • Four-bit storage with output enable
  • Storage

Write a review

Note: HTML is not translated!
    Bad           Good