SN74BCT374DW
| Parameters | |
|---|---|
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 12.7 ns |
| Turn On Delay Time | 7.2 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Current - Quiescent (Iq) | 5mA |
| Current - Output High, Low | 15mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 9.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
| Power Supply Current-Max (ICC) | 60mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74BCT374 |
| Function | Standard |
SN74BCT374DW Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of 0°C~70°C TAis used in the operation. D-Typedescribes this flip flop. It belongs to the 74BCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 70MHz. A total of 1 elements are present. There is a consumption of 5mAof quiescent energy. There have been 20 terminations. You can search similar parts based on 74BCT374. A voltage of 5V provides power to the D latch. A 6pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as BCT/FBT. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. Due to its superior flexibility, it uses 8 circuits. A power supply of 5Vis required to operate it. This flip flop has a total of 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. This T flip flop features a maximum design flexibility due to its output current of 64mA. There are 3 output lines on it.
SN74BCT374DW Features
Tube package
74BCT series
20 pins
8 Bits
5V power supplies
SN74BCT374DW Applications
There are a lot of Texas Instruments SN74BCT374DW Flip Flops applications.
- Balanced 24 mA output drivers
- Individual Asynchronous Resets
- Single Down Count-Control Line
- Load Control
- EMI reduction circuitry
- Automotive
- Counters
- Computers
- High Performance Logic for test systems
- Reduced system switching noise
