SN74BCT374DWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 9.1 ns |
| Turn On Delay Time | 7.2 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 5mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 9.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
| Power Supply Current-Max (ICC) | 60mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74BCT374DWRG4 Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. The Tape & Reel (TR)package contains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Temperature is set to 0°C~70°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74BCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 70MHz. There are 1 elements in it. It consumes 5mA of quiescent A total of 20terminations have been recorded. You can search similar parts based on 74BCT374. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 6pF farads. A device of this type belongs to the family of BCT/FBT. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with 8bits. Vsup reaches its maximum value at 5.5V. Normal operation requires a supply voltage (Vsup) above 4.5V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The D flip flop has no ports embedded. The output current of 64mA makes it feature maximum design flexibility. Currently, there are 8 input lines present.
SN74BCT374DWRG4 Features
Tape & Reel (TR) package
74BCT series
20 pins
8 Bits
5V power supplies
SN74BCT374DWRG4 Applications
There are a lot of Texas Instruments SN74BCT374DWRG4 Flip Flops applications.
- Set-reset capability
- Individual Asynchronous Resets
- Buffered Clock
- Storage registers
- Test & Measurement
- Pattern generators
- Control circuits
- ESD protection
- Asynchronous counter
- Bus hold
