SN74BCT573NSRG4
| Parameters | |
|---|---|
| Turn On Delay Time | 6.1 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9.6 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 62mA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8.2 ns |
SN74BCT573NSRG4 Overview
20-SOIC (0.209, 5.30mm Width) contains it. Packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. The operating temperature is 0°C~70°C. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. In this device, there are 20 terminations. The family it belongs to is 74BCT573. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. BCT/FBT is the family of this electronic device. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. Vsup reaches 5.5V as the maximum supply voltage. The system is powered by 5V sources. A voltage greater than 4.5V must be supplied as a power supply (Vsup). Electronic circuits comprise 8 input lines. The reliability of this device makes it well suited to TAPE AND REEL. The 64mA output current gives it maximum design flexibility.
SN74BCT573NSRG4 Features
20-SOIC (0.209, 5.30mm Width) package
74BCT series
8 Bits
74BCT573 family
20 pin count
20 pins
5V power supplies
SN74BCT573NSRG4 Applications
There are a lot of Texas Instruments SN74BCT573NSRG4 Latches applications.
- Sample and hold register
- General-Purpose Register
- Multistage ripple counting
- Counter timers
- A/D and D/A conversion
- Buffer/Storage Registers
- Digital bus buffer
- Counter control
- Serial Input
- Parallel data synchronization
