SN74BCT574DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74BCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 77MHz |
| Propagation Delay | 8.6 ns |
| Turn On Delay Time | 6.5 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8mA |
| Current - Output High, Low | 15mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 8.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5.5pF |
| Power Supply Current-Max (ICC) | 62mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 77000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74BCT574DW Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of 0°C~70°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74BCT series. You should not exceed 77MHzin the output frequency of the device. A total of 1 elements are present. There is 8mA quiescent consumption. There have been 20 terminations. JK flip flop belongs to 74BCT574 family. An input voltage of 5Vpowers the D latch. The input capacitance of this T flip flop is 5.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of BCT/FBT. The electronic part is mounted in the way of Surface Mount. This board has 20 pins. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 8bits in its design. To achieve this superior flexibility, 8 circuits are used. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage should be maintained at 5V for high efficiency. It offers maximum design flexibility with its output current of 64mA. There are no output lines on the JK flip flop.
SN74BCT574DW Features
Tube package
74BCT series
20 pins
8 Bits
5V power supplies
SN74BCT574DW Applications
There are a lot of Texas Instruments SN74BCT574DW Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Balanced 24 mA output drivers
- ESD performance
- Digital electronics systems
- Bounce elimination switch
- Instrumentation
- Automotive
- Clock pulse
- Parallel data storage
- Memory
