SN74BCT757DWE4
| Parameters | |
|---|---|
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT757 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Open Collector |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 9.6 ns |
| Turn On Delay Time | 19.7 ns |
| Family | BCT/FBT |
| Logic Function | AND, Buffer, Inverting |
| Current - Output High, Low | - 64mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 4 |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 77mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
SN74BCT757DWE4 Overview
Logical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is - 64mA. Logical driver can deal with Open Collector output (s). All of the 2 elements are put into use. Digital buffer is one of the 74BCT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the BCT/FBT family are used in this part. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74BCT757" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW/HIGH control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Wireless transceiver is able to output 3 lines. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74BCT757DWE4 Features
Bus Driver/Transceivers
SN74BCT757DWE4 Applications
There are a lot of Texas Instruments SN74BCT757DWE4 Buffers & Transceivers applications.
- SONET/SDH Network
- Single to Multimode Fiber Conversion
- Mainframes, workstations or storage devices
- Changeing the frequency from IF to RF
- Car radio
- Wireless transmission
- Gigabit Ethernet
- Clock radio
- Fiber distributed data interface (FDDI)
- Carrier phase observations
