SN74CB3Q16210DGGR
| Parameters | |
|---|---|
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CB3Q16210 |
| Pin Count | 48 |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Output Current | 30mA |
| Max Supply Current | 3mA |
| Number of Bits | 20 |
| Throw Configuration | SPST |
| Propagation Delay | 9 ns |
| Quiescent Current | 3mA |
| Turn On Delay Time | 8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Turn-Off Delay Time | 7 ns |
| Screening Level | AEC-Q100 |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
SN74CB3Q16210DGGR Overview
As a means of saving space, digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width).The package is packaged in accordance with Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.As the analog part, the circuit uses an analog IC Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.With the 74CB series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 48 terminations.The part number for 74CB3Q16210 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 2.5V voltage.This turn signal switch contains 48 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.This multiplexer ic has 48 pins configured.The mount is in Surface Mount.In the signal multiplexer, there are 20 bits available.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.This is a signal switch that is categorized as Bus Driver/Transceivers.Without external influences, it consumes 3mA current of multiplexer ic.According to TR, the switches is packaged.2 is the resistance at which it operates.With a resistance of 9Ohm, it operates.Additionally, it improves the characteristics of ALSO OPERATES AT 3.3V SUPPLY.For higher switches' flexibility, the output current is set to 30mA.
SN74CB3Q16210DGGR Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY
SN74CB3Q16210DGGR Applications
There are a lot of Texas Instruments SN74CB3Q16210DGGR Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Enabling block of memory depending on address in memory chips
- Video transmission
- Logic gates for other digital devices
- Data communication
- VGA
- Microprocessor input/output systems
- Medium scale TV wall
- HD surveillance system
- D/A converters
