SN74CB3Q16210DGVR

48 Terminations2.3V~3.6V 48 Pin 74CB3Q16210 Signal switch74CB Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3Q16210DGVR
Package: 48-TFSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 310
Description: 48 Terminations2.3V~3.6V 48 Pin 74CB3Q16210 Signal switch74CB Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.173, 4.40mm Width)
Number of Pins	48
Weight	123.490523mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	Bus Switch
Resistance	9Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES AT 3.3V SUPPLY
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.4mm
Base Part Number	74CB3Q16210
Pin Count	48
Circuit	10 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Number of Ports	2
Nominal Supply Current	1mA
Output Current	30mA
Number of Bits	20
Throw Configuration	SPST
Propagation Delay	9 ns
Quiescent Current	3mA
Turn On Delay Time	9 ns
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	500MHz
Screening Level	AEC-Q100
High Level Output Current	-64mA
Low Level Output Current	64mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	9.7mm
Width	4.4mm
Thickness	1.05mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CB3Q16210DGVR Overview

Due to the fact that it is provided in the 48-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.Bus Switch is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74CB series, which provide extensive application potential.As part of its basic configuration, 48 terminations are designed as a part of it.Its logic switch base part number is 74CB3Q16210 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 2.5V volts.Signal switch has 48 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Single is employed as the supply type.Currently, it is configured with a 48 pin configuration.The mounting is in the way of Surface Mount.In the signal multiplexer, there are 20 bits available.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 3mA current.TR is used to package the switches.2 ports are used for some other peripheral signal switchings to plug in.This signal switching operates at a resistance of 9Ohm.In addition, it provides improved characteristics compared to ALSO OPERATES AT 3.3V SUPPLY.Higher switches' flexibility is provided by providing 30mA as the output current.