SN74CB3Q16210DL
| Parameters | |
|---|---|
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CB3Q16210 |
| Pin Count | 48 |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 30mA |
| Number of Bits | 20 |
| Propagation Delay | 9 ns |
| Quiescent Current | 3mA |
| Turn On Delay Time | 9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| Screening Level | AEC-Q100 |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
SN74CB3Q16210DL Overview
This is a relatively small item of digital switch that is included in the 48-BSSOP (0.295, 7.50mm Width) in order to save space on the board.In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74CB series.The basic configuration includes 48 terminations.In addition, it also has a base part number of 74CB3Q16210, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 2.5V.This turn signal switch has a total of 48 component pins.It employs GULL WING as the point at which conductors come to an end.This supply type employs Single.Currently, it is configured with a 48 pin configuration.The mount is in Surface Mount.The multiplexer ic provides 20 bits.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.Bus Driver/Transceivers is a category for the digital switch ics.It consumes 3mA current of multiplexer ic since it is not affected by external factors.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 9Ohm.In addition, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics.For higher switches' flexibility, the output current is set to 30mA.
SN74CB3Q16210DL Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY
SN74CB3Q16210DL Applications
There are a lot of Texas Instruments SN74CB3Q16210DL Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Medical industry
- Memory system of computers
- Idle motor
- Automatic Monitoring systems
- Memory chips
- Data transfer
- Computer memory
- Frequency multiplexing system
- War field flying robot with a night vision flying camera
