Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Weight |
252.792698mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
9Ohm |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CB3Q16211 |
Pin Count |
56 |
Circuit |
12 x 1:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Ports |
2 |
Nominal Supply Current |
1mA |
Output Current |
30mA |
Number of Bits |
24 |
Throw Configuration |
SPST |
Propagation Delay |
150 ps |
Quiescent Current |
3mA |
Turn On Delay Time |
8 ns |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
500MHz |
Screening Level |
AEC-Q100 |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
14mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CB3Q16211DGGR Overview
Due to the lack of space on the board, digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width).It is packaged according to the Tape & Reel (TR) method.For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2.3V~3.6V supply voltage.Multiplexers of the 74CB series can be used in a wide range of applications.Among its basic configurations are 56 terminations.The base part number is 74CB3Q16211, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 2.5V is supplied.Signal switch has 56 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.With 56 pins, it is configured.This unit is mounted in the way of Surface Mount.Signal multiplexer consists of 24 bits.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.This is a signal switch that is categorized as Bus Driver/Transceivers.It consumes 3mA current of multiplexer ic since it is not affected by external factors.Currently, the switches is packaged in accordance with the TR method.2 ports are used for some other peripheral signal switchings to plug in.As far as the resistance is concerned, it operates with 9Ohm.For higher switches' flexibility, the output current is set to 30mA.
SN74CB3Q16211DGGR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
SN74CB3Q16211DGGR Applications
There are a lot of Texas Instruments SN74CB3Q16211DGGR Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- Solenoid cooling fan
- Electronic circuits
- Data-routing applications
- Frequency multiplexing system
- LVDS
- Injectors
- Recording transmission
- To select different devices in microprocessor input
- Implementing boolean functions with multiple variables