SN74CB3Q16211DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CB3Q16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 30mA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 8 ns |
| Quiescent Current | 3mA |
| Turn On Delay Time | 8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Screening Level | AEC-Q100 |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q16211DGVR Overview
Digital switch is provided in the 56-TFSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is packaged in accordance with Tape & Reel (TR).Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Since they are members of the 74CB series, they can be used in a wide variety of applications.It is designed with 56 terminations as part of its basic configuration.The base part number is 74CB3Q16211, which is also useful when looking up signal switch's related components.In multiplexer's system, 2.5V is the voltage supplied.This turn signal switch contains 56 component pins.As a result, conductors end at GULL WING.This supply type employs Single.It is configured with 56 pins.It is positioned in the direction of Surface Mount.Signal multiplexer provides 24 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 3mA current of multiplexer ic.A TR packaging method is used in the switches.The signal switching operates with a resistance of 2.With a resistance of 9Ohm, it operates.For higher switches' flexibility, 30mA is provided as an output current.
SN74CB3Q16211DGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3Q16211DGVR Applications
There are a lot of Texas Instruments SN74CB3Q16211DGVR Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Control unit of Central Processing unit (CPU)
- Steel plants
- Transmission from the computer system of a satellite
- Used to connect a single source to multiple destinations
- Enabling different functions units in microprocessor instruction decoding
- Medical industry
- Frequency multiplexing system
- High-performance memory systems
- Encrypted communications system
