SN74CB3Q16211DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CB3Q16211 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 30mA |
| Number of Bits | 24 |
| Propagation Delay | 150 ps |
| Quiescent Current | 3mA |
| Turn On Delay Time | 8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| Screening Level | AEC-Q100 |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q16211DL Overview
As a means of saving space, digital switch is provided in the 56-BSSOP (0.295, 7.50mm Width).The package is in the form of Tube.The mounting method digital switch ic uses is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CB series can be used in a wide range of applications.The basic configuration includes 56 terminations.As its base part number is 74CB3Q16211, logic switch can also be used to find its related parts.The multiplexer's system is powered by 2.5V volts.In this turn signal switch, there are 56 components that can be connected to each pin.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.With 56 pins, it is configured.The mount is in Surface Mount.Signal multiplexer contains 24 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.This is a signal switch that is categorized as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 3mA current of multiplexer ic.2 ports are used for some other peripheral signal switchings to plug in.A resistance of 9Ohm is used to operate the signal switching.It is possible to provide a current output of 30mA for greater switches' flexibility.
SN74CB3Q16211DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CB3Q16211DL Applications
There are a lot of Texas Instruments SN74CB3Q16211DL Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Enabling different rows of memory depending on address in memory chips
- Communication system
- Data transfer
- A robotic vehicle with the metal detector
- Robotic vehicles
- Electronically controlled engine system
- Textile mills
- Data communication
- Analog to digital conversion
