SN74CB3Q16244DGGR

48 Terminations2.3V~3.6V 48 Pin 74CB3Q16244 Signal switch74CB Series 4 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3Q16244DGGR
Package: 48-TFSOP (0.240, 6.10mm Width)
Datasheet: PDF
Stock: 959
Description: 48 Terminations2.3V~3.6V 48 Pin 74CB3Q16244 Signal switch74CB Series 4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.240, 6.10mm Width)
Number of Pins	48
Weight	223.195796mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	Bus Switch
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	74CB3Q16244
Pin Count	48
Circuit	4 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Ports	2
Output Current	30mA
Max Supply Current	2μA
Number of Bits	16
Propagation Delay	8 ns
Quiescent Current	2mA
Turn On Delay Time	8 ns
Family	CB3Q/3VH/3C/2B
Logic Function	Demultiplexer, Multiplexer
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	500MHz
Prop. Delay@Nom-Sup	0.3 ns
Screening Level	AEC-Q100
High Level Output Current	-64mA
Low Level Output Current	64mA
Voltage Supply Source	Single Supply
Independent Circuits	4
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	12.5mm
Width	6.1mm
Thickness	1.15mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CB3Q16244DGGR Overview

As a means of saving space, digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width).The package is packaged in the manner of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 2.3V~3.6V supply voltage.In addition to being a member of the 74CB series, these multiplexers have a wide range of applications.As parts of its basic configuration, 48 terminations are desgined.Its logic switch base part number is 74CB3Q16244 which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 2.5V volts.In this turn signal switch, there are 48 components that can be connected to each pin.A conductor terminates at GULL WING.Its supply type is Single, which is used as the source of power.It is configured with 48 pins.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CB3Q/3VH/3C/2B family.There are 16 bits in signal multiplexer.Vsup should be kept at 2.3V to prevent some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.In order for 2.5/3.3V to operate normally, a power supply is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 2mA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.The resistance is 2.A resistance of 10Ohm is used to operate the signal switching.Higher switches' flexibility is provided by providing 30mA as the output current.