SN74CB3Q16811DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CB3Q16811 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 30mA |
| Number of Bits | 24 |
| Propagation Delay | 8 ns |
| Quiescent Current | 3mA |
| Turn On Delay Time | 8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Turn-Off Delay Time | 7.5 ns |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 0.15 ns |
| Screening Level | AEC-Q100 |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q16811DGGR Overview
It is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save board space.In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74CB series can be used in a wide range of applications.There are 56 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74CB3Q16811 may also be used.The multiplexer is supplied with 2.5V voltage.In this turn signal switch, there are 56 component pins.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.Currently, it is configured with a 56 pin configuration.It is positioned in the direction of Surface Mount.The multiplexer ic provides 24 bits.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.The part belongs to the Bus Driver/Transceivers category of signal switches.No external influence consumes 3mA current of multiplexer ic.The switches package is packaged in accordance with TR.The resistance of the signal switching is 2.The resistance of the signal switching is 9Ohm.In addition, it provides improved features of ALSO OPERATES AT 3.3V SUPPLY.There is an output current of 30mA that allows for greater switches' flexibility.
SN74CB3Q16811DGGR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY
SN74CB3Q16811DGGR Applications
There are a lot of Texas Instruments SN74CB3Q16811DGGR Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Data communication
- Memory chips
- D/A converters
- Data-routing applications
- VGA
- Control unit of Central Processing unit (CPU)
- Automatic Monitoring systems
- Steel plants
- Time division multiplexing system
