SN74CB3Q16811DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CB3Q16811 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 30mA |
| Number of Bits | 24 |
| Propagation Delay | 8 ns |
| Quiescent Current | 3mA |
| Turn On Delay Time | 8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Turn-Off Delay Time | 7.5 ns |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 0.15 ns |
| Screening Level | AEC-Q100 |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q16811DGVR Overview
In order to conserve board space, digital switch is included in the 56-TFSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.The multiplexers from 74CB series can be used for a wide range of applications.Among its basic configurations are 56 terminations.In addition, it also has a base part number of 74CB3Q16811, which can be used to find related parts.The multiplexer is supplied with 2.5V voltage.This turn signal switch contains 56 component pins.GULL WING represents the end of conductors.In this case, the supply type is Single.Currently, it is configured with a 56 pin configuration.It is mounted in the way of Surface Mount.Signal multiplexer contains 24 bits.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 3mA current of multiplexer ic.TR is used to package the switches.The resistance of the signal switching is 2.The resistance of the signal switching is 9Ohm.Furthermore, the characteristics of ALSO OPERATES AT 3.3V SUPPLY have been improved.For greater switches' flexibility, the output current of 30mA is provided.
SN74CB3Q16811DGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY
SN74CB3Q16811DGVR Applications
There are a lot of Texas Instruments SN74CB3Q16811DGVR Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- Solenoid cooling fan
- Data-routing applications
- Electronics industry
- Idle motor
- Microprocessor memory systems
- Make full adder
- Speed synchronization of multiple motors in industries
- Image transmission
- Memory system of computers
