banner_page

SN74CB3Q3125PWG4

14 Terminations14 Pin Signal switch4 FunctionsMin 2.3V VMax 3.6V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CB3Q3125PWG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 825
  • Description: 14 Terminations14 Pin Signal switch4 FunctionsMin 2.3V VMax 3.6V V(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 14
Weight 59.987591mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 14
Resistance 4Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.5V
Pin Count 14
Power Supplies 2.5/3.3V
Temperature Grade INDUSTRIAL
Number of Channels 4
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Number of Ports 2
Number of Bits 1
Propagation Delay 200 ps
Quiescent Current 1mA
Turn On Delay Time 6.7 ns
Family CB3Q/3VH/3C/2B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 500MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -64mA
Low Level Output Current 64mA
Height 1.15mm
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74CB3Q3125PWG4 Overview


As a means of saving space, digital switch is provided in the TSSOP.There are 14 terminations included in its basic configuration.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch contains 14 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.The board has 14 pins configured.This unit is mounted in the way of Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.Signal multiplexer consists of 1 bits.Normally, 2.5/3.3V is powered by a battery.The part belongs to the Bus Driver/Transceivers category of signal switches.It consumes 1mA current of multiplexer ic without external influences.A resistance of 2 governs its operation.A resistance of 4Ohm is used to operate the signal switching.The turn signal switch's circuit has 4 transmission channels.The maximum temperature for this signal switch is 85°C.Temperatures of the multiplexer should be kept at -40°C.According to the applicable device specification, the signal switches operates at a maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is specified for the digital swith in accordance with its applicable specifications.In terms of logic ICs, it uses BUS DRIVER.

SN74CB3Q3125PWG4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC

SN74CB3Q3125PWG4 Applications


There are a lot of Texas Instruments SN74CB3Q3125PWG4 Signal Switches / Multiplexers / Decoders applications.

  • Implementing boolean functions with multiple variables
  • A robotic vehicle with the metal detector
  • Computer memory
  • Data transfer
  • Memory system of computers
  • Recording transmission
  • Analog, digital or video signal switching
  • Speed control of medern motors
  • Automatic Monitoring systems
  • Metal detectors

Write a review

Note: HTML is not translated!
    Bad           Good