Parameters |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Type |
Bus Switch |
Resistance |
4Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO OPERATES WITH 3.3V SUPPLY |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Base Part Number |
74CB3Q3125 |
Pin Count |
14 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Channels |
4 |
Number of Ports |
2 |
Number of Bits |
1 |
Propagation Delay |
200 ps |
Quiescent Current |
1mA |
Turn On Delay Time |
6.7 ns |
Family |
CB3Q/3VH/3C/2B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
500MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.2 ns |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
SN74CB3Q3125PWRE4 Overview
In order to save board space, digital switch is located in the 14-TSSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.Several applications are possible for 74CB series multiplexers.There is a design for terminating 14 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CB3Q3125.The multiplexer's system works with 2.5V voltage.Currently, this turn signal switch has a total of 14 component pins.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.With 14 pins, it is configured.It is positioned in the direction of Surface Mount.The CB3Q/3VH/3C/2B family includes the logic switch.There are 1 bits in signal multiplexer.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.This is a signal switch that is categorized as Bus Driver/Transceivers.It consumes 1mA current of multiplexer ic without external influences.The switches package is packaged in accordance with the TR method.This signal switching operates at a resistance of 2.A resistance of 4Ohm is used to operate the signal switching.The turn signal switch's circuit consists of 4 transmission channels.Additionally, ALSO OPERATES WITH 3.3V SUPPLY has improved characteristics.
SN74CB3Q3125PWRE4 Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 3.3V SUPPLY
SN74CB3Q3125PWRE4 Applications
There are a lot of Texas Instruments SN74CB3Q3125PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- Recording transmission
- A robotic vehicle with the metal detector
- To select different devices in microprocessor output
- Video transmission
- To select different devices in microprocessor input
- Time division multiplexing system
- Data transfer
- Signal router
- Solenoid cooling fan