SN74CB3Q3244DBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CB3Q3244 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 200 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 7.1 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q3244DBQR Overview
In order to save board space, digital switch is located in the 20-SSOP (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.Bus Switch is the analog IC that the multiplexers uses.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Multiplexers of the 74CB series can be used in a wide range of applications.The basic configuration includes 20 terminations.To find signal switch's related components, a base part number of 74CB3Q3244 may also be used.The multiplexer's system is supplied with a voltage of 2.5V.In this turn signal switch, there are 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.It is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.There are 8 bits signal multiplexer provides.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 2mA current of multiplexer ic.The signal switching is packaged by TR. The resistance of the signal switching is 2.5Ohm is the resistance at which it operates.
SN74CB3Q3244DBQR Features
Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
SN74CB3Q3244DBQR Applications
There are a lot of Texas Instruments SN74CB3Q3244DBQR Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Automatic Monitoring systems
- Control unit of Central Processing unit (CPU)
- D/A converters
- Frequency multiplexing system
- Data demultiplexing
- Idle motor
- Video transmission
- Electronically controlled engine system
- GLAN
