SN74CB3Q3244PW
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CB3Q3244 |
| Pin Count | 20 |
| Circuit | 4 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Output Current | 30mA |
| Number of Bits | 8 |
| Propagation Delay | 7.1 ns |
| Quiescent Current | 2mA |
| Turn On Delay Time | 7.1 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
SN74CB3Q3244PW Overview
In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CB series can be used in a wide range of applications.The basic configuration of this system includes 20 terminations.The base part number is 74CB3Q3244, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 2.5V.A component pin count of 20 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.A configuration of 20 pins is used.The mount is in Surface Mount.There are 8 bits in signal multiplexer.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.The part belongs to the Bus Driver/Transceivers category of signal switches.No external influence consumes 2mA current of multiplexer ic.A resistance of 2 governs its operation.This signal switching operates at a resistance of 5Ohm.The output current of 30mA is provided for higher switches' flexibility.
SN74CB3Q3244PW Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3Q3244PW Applications
There are a lot of Texas Instruments SN74CB3Q3244PW Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Electronics industry
- Microprocessor input/output systems
- Decimal decoder
- Data distribution
- Automatic health monitoring systems
- PCIe
- Electronically controlled engine system
- Automation system
- VGA
