Parameters |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
20 |
Weight |
76.997305mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Resistance |
5Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Pin Count |
20 |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.3V |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
200 ps |
Quiescent Current |
2mA |
Turn On Delay Time |
7.1 ns |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Independent Circuits |
2 |
Length |
6.5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74CB3Q3244PWG4 Overview
As a means of saving space, digital switch is provided in the TSSOP.Rail/Tube is the method used for packaging.The basic configuration of this system includes 20 terminations.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch has 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.Currently, it is configured with a 20 pin configuration.As you can see, it is mounted in the direction of Surface Mount.Signal multiplexer consists of 8 bits.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 2mA current of multiplexer ic.The resistance is 2.As far as the resistance is concerned, it operates with 5Ohm.A maximum temperature of 85°C is acceptable for this signal switch.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.Device specifications specify 3.6V as the maximum supply voltage for the signal switches.A minimum supply voltage of 2.3V is specified for the digital swith in accordance with its applicable specifications.For its logic, IC BUS DRIVER is used.
SN74CB3Q3244PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
SN74CB3Q3244PWG4 Applications
There are a lot of Texas Instruments SN74CB3Q3244PWG4 Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Electronics industry
- VGA
- To select different task for memory in microprocessor memory systems
- Data transfer
- Data communication
- Code converters
- Time division multiplexing system
- Computer memory
- Video transmission