SN74CB3Q3244PWR
| Parameters | |
|---|---|
| Propagation Delay | 200 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 7.1 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CB3Q3244 |
| Pin Count | 20 |
| Circuit | 4 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Throw Configuration | SPST |
SN74CB3Q3244PWR Overview
Digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.With the 74CB series, the multiplexers are suitable for a diverse range of applications.There are 20 terminations included in its basic configuration.In addition, it also has a base part number of 74CB3Q3244, which can be used to find related parts.In this case, 2.5V is the voltage supplied to the multiplexer's system.Currently, this turn signal switch has a total of 20 component pins.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.With 20 pins, it is configured.It is mounted in the way of Surface Mount.In the signal multiplexer, there are 8 bits available.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.This is a signal switch that is categorized as Bus Driver/Transceiver.In the absence of external influences, it consumes 2mA current of multiplexer ic.Currently, the switches is packaged in accordance with the TR method.The signal switching operates with a resistance of 2.A resistance of 5Ohm is used to operate the signal switching.
SN74CB3Q3244PWR Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3Q3244PWR Applications
There are a lot of Texas Instruments SN74CB3Q3244PWR Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Video transmission
- Combinational circuit
- Automatic Monitoring systems
- Injectors
- Decimal decoder
- Memory chips
- Recording transmission
- D/A converters
- Medical industry
