SN74CB3Q3244PWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CB3Q3244 |
| Pin Count | 20 |
| Circuit | 4 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 7.1 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q3244PWRE4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 20-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.The method digital switch ic adopts for mounting is Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CB series can be used for a wide range of applications.Among its basic features are 20 terminations.The base part number is 74CB3Q3244, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 2.5V is supplied.A component pin count of 20 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.In this case, Single is employed as the supply type.A total of 20 pins are configured on this board.It is positioned in the direction of Surface Mount.As a result, signal multiplexer provides 8 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Part number Bus Driver/Transceiver indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 2mA current of multiplexer ic.In accordance with TR, switches can be packaged.The system operates with a resistance of 2.As far as the resistance is concerned, it operates with 5Ohm.
SN74CB3Q3244PWRE4 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3Q3244PWRE4 Applications
There are a lot of Texas Instruments SN74CB3Q3244PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Speed control of medern motors
- CPU memory location identification
- Memory system of computers
- Home automation system
- HDMI applications
- Audio transmission
- RF-based home automation system
- Automation system
- Microprocessor input/output systems
