SN74CB3Q3244ZQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CB |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CB3Q3244 |
| Pin Count | 20 |
| Circuit | 4 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Output Current | 30mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 200 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 7.1 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1mm |
| Length | 4mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q3244ZQNR Overview
Due to the lack of space on the board, digital switch is provided in the 20-VFBGA.Cut Tape (CT) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sMultiplexers from the 74CB series can be used in a wide range of applications.There are 20 terminations included in its basic configuration.There is a base part number 74CB3Q3244 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 2.5V voltage.There are 20 component pins in this turn signal switch.As the end of conductors, it uses BALL.In this case, Single is employed as the supply type.The board is configured with 20 pins.It is positioned in the direction of Surface Mount.As a result, signal multiplexer provides a total of 8 bits.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.This is a signal switch that is categorized as Bus Driver/Transceivers.In the absence of external influences, it consumes 2mA current of multiplexer ic.The switches package is packaged in accordance with the TR method.The system operates with a resistance of 2.This signal switching operates at a resistance of 5Ohm.The output current of 30mA is provided for higher switches' flexibility.
SN74CB3Q3244ZQNR Features
Supplied in the 20-VFBGA package
Adopting a supply type of Single
SN74CB3Q3244ZQNR Applications
There are a lot of Texas Instruments SN74CB3Q3244ZQNR Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- CNC machines
- Night vision cameras
- Combinational circuit
- To select different devices in microprocessor output
- Small scale TV wall
- Image transmission
- Transmission from the computer system of a satellite
- Electronics industry
- A/D converters
