SN74CB3Q3245GQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.687385mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | ALSO OPERATES WITH 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CB3Q3245 |
| Pin Count | 20 |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 7.5 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CB3Q3245GQNR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 20-VFBGA.The package is packaged in accordance with Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CB series, these multiplexers have a wide range of applications.As part of its basic configuration, 20 terminations are designed as a part of it.The base part number is 74CB3Q3245, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 2.5V volts.There are 20 component pins in this turn signal switch.BALL represents the end of conductors.In this case, the supply type is Single.This multiplexer ic is configured with 20 pins.It is positioned in the direction of Surface Mount.The CB3Q/3VH/3C/2B family includes the logic switch.In this signal multiplexer, there are 8 bits that are provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.A power supply is provided for mux switch's normal operation of 2.5/3.3V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 2mA current of multiplexer ic since it is not affected by external factors.This signal switching operates at a resistance of 2.7Ohm is the resistance at which it operates.Additionally, it improves the characteristics of ALSO OPERATES WITH 3.3V SUPPLY.
SN74CB3Q3245GQNR Features
Supplied in the 20-VFBGA package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 3.3V SUPPLY
SN74CB3Q3245GQNR Applications
There are a lot of Texas Instruments SN74CB3Q3245GQNR Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Telephone network
- Speed synchronization of multiple motors in industries
- Analog to digital conversion
- Speed control of medern motors
- Enabling different rows of memory depending on address in memory chips
- Medium scale TV wall
- To select different devices in microprocessor output
- To select different devices in microprocessor input
- Encrypted communications system
