banner_page

SN74CB3Q3245PWE4

20 Terminations20 Pin Signal switch1 FunctionsMin 2.3V VMax 3.6V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CB3Q3245PWE4
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 349
  • Description: 20 Terminations20 Pin Signal switch1 FunctionsMin 2.3V VMax 3.6V V(Kg)

Details

Tags

Parameters
Bandwidth 500MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -64mA
Low Level Output Current 64mA
Independent Circuits 1
Length 6.5mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Resistance 9Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature ALSO OPERATES WITH 3.3V SUPPLY
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Pin Count 20
Power Supplies 2.5/3.3V
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Number of Ports 2
Nominal Supply Current 1mA
Current - Output 30mA
Number of Bits 8
Propagation Delay 7.5 ns
Quiescent Current 2mA
Turn On Delay Time 7.5 ns
Family CB3Q/3VH/3C/2B
Output Characteristics 3-STATE
Supply Type Single

SN74CB3Q3245PWE4 Overview


For the purpose of saving board space, digital switch is included in the TSSOP.The package is packaged in the manner of Rail/Tube.Among its basic configurations are 20 terminations.The multiplexer's system is powered by 2.5V voltage.In this turn signal switch, there are 20 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.As a type of supply, Single is employed.Currently, it is configured with a 20 pin configuration.The mounting is in the way of Surface Mount.The logic switch is a member of the family of CB3Q/3VH/3C/2B.There are 8 bits signal multiplexer provides.The power supply of 2.5/3.3V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without external influences, it consumes 2mA current of multiplexer ic.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 9Ohm.There is no problem with operating this signal switch at the maximum temperature of 85°C.Temperatures of the multiplexer should be kept at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is specified for the digital swith by its applicable specification.It also provides improved characteristics of ALSO OPERATES WITH 3.3V SUPPLY.A logic IC based on BUS DRIVER is employed in this system.

SN74CB3Q3245PWE4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 3.3V SUPPLY
BUS DRIVER as the logic IC

SN74CB3Q3245PWE4 Applications


There are a lot of Texas Instruments SN74CB3Q3245PWE4 Signal Switches / Multiplexers / Decoders applications.

  • To select different devices in microprocessor output
  • Frequency multiplexing system
  • Microprocessor instruction decoding
  • Transmission from the computer system of a satellite
  • Data bus control
  • Night vision cameras
  • Analog, digital or video signal switching
  • GLAN
  • HD surveillance system
  • To select different devices in microprocessor input

Write a review

Note: HTML is not translated!
    Bad           Good