banner_page

SN74CB3Q3245PWG4

20 Terminations20 Pin Signal switch1 FunctionsMin 2.3V VMax 3.6V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CB3Q3245PWG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 281
  • Description: 20 Terminations20 Pin Signal switch1 FunctionsMin 2.3V VMax 3.6V V(Kg)

Details

Tags

Parameters
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Pin Count 20
Power Supplies 2.5/3.3V
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Number of Ports 2
Nominal Supply Current 1mA
Current - Output 30mA
Number of Bits 8
Propagation Delay 200 ps
Quiescent Current 2mA
Turn On Delay Time 7.5 ns
Family CB3Q/3VH/3C/2B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 500MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -64mA
Low Level Output Current 64mA
Independent Circuits 1
Height 1.15mm
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Resistance 9Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature ALSO OPERATES WITH 3.3V SUPPLY
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL

SN74CB3Q3245PWG4 Overview


In order to conserve board space, digital switch is included in the TSSOP.There are 20 terminations included in its basic configuration.The multiplexer's system is powered by 2.5V volts.This turn signal switch contains 20 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.This multiplexer ic is configured with 20 pins.The mount is in Surface Mount.Among the family of CB3Q/3VH/3C/2B the logic switch is a member.Signal multiplexer consists of 8 bits.It is provided that 2.5/3.3V has a power supply in order to function normally.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 2mA current of multiplexer ic.As far as the resistance is concerned, it operates with 2.This signal switching operates at a resistance of 9Ohm.85°C is an acceptable maximum temperature for this signal switch.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.According to the applicable device specification, the signal switches operates at a maximum supply voltage of 3.6V.According to its specifications, the digital swith requires a minimum supply voltage of 2.3V.In addition, it provides improved characteristics compared to ALSO OPERATES WITH 3.3V SUPPLY.In terms of logic ICs, it uses BUS DRIVER.

SN74CB3Q3245PWG4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 3.3V SUPPLY
BUS DRIVER as the logic IC

SN74CB3Q3245PWG4 Applications


There are a lot of Texas Instruments SN74CB3Q3245PWG4 Signal Switches / Multiplexers / Decoders applications.

  • Data collection system
  • Code conversion
  • HD surveillance system
  • HDMI applications
  • Night vision cameras
  • Data communication
  • Transmission from the computer system of a satellite
  • Audio transmission
  • Make full adder
  • To select different devices in microprocessor output

Write a review

Note: HTML is not translated!
    Bad           Good