SN74CB3Q3251PWR

16 Terminations2.3V~3.6V 16 Pin 74CB3Q3251 Signal switch74CB Series 8 Outputs1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3Q3251PWR
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 479
Description: 16 Terminations2.3V~3.6V 16 Pin 74CB3Q3251 Signal switch74CB Series 8 Outputs1 Functions(Kg)

Details

Tags

Parameters
ECCN Code	EAR99
Type	Multiplexer/Demultiplexer
Resistance	10Ohm
Subcategory	Other Logic ICs
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	74CB3Q3251
Pin Count	16
Number of Outputs	8
Circuit	1 x 8:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Operating Supply Current	4mA
Number of Bits	8
Propagation Delay	6.7 ns
Quiescent Current	4mA
Turn On Delay Time	6.7 ns
Family	CB3Q/3VH/3C/2B
Logic Function	Demultiplexer, Multiplexer
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	500MHz
High Level Output Current	-64mA
Low Level Output Current	64mA
Power Supply Current-Max (ICC)	2mA
Voltage Supply Source	Single Supply
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16

SN74CB3Q3251PWR Overview

Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74CB series can be used in a wide range of applications.The basic configuration includes 16 terminations.The base part number is 74CB3Q3251, so you can find its logic switch related parts using that number.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemCurrently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.It is configured with 16 pins.In the CB3Q/3VH/3C/2B family, the logic switch is included.In the signal multiplexer, there are 8 bits available.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.The turn signal switch operates with 8 outputs.In electronic terms, the digital switch ic is classified as Other Logic ICs.It consumes 4mA current of multiplexer ic since it is not affected by external factors.The switches is packaged according to the way of TR.With a resistance of 10Ohm, it operates.To ensure that the digitalswitch performs properly, 1 circuits are formed.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 4mA.

SN74CB3Q3251PWR Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 4mA