SN74CB3Q3253PWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 4.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CB3Q3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Bits | 2 |
| Propagation Delay | 180 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 6.7 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q3253PWRE4 Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The multiplexers uses an analog IC Multiplexer/Demultiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74CB series multiplexers.As part of its basic configuration, 16 terminations are designed as a part of it.Its logic switch base part number is 74CB3Q3253 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch has a total of 16 component pins.A conductor terminates at GULL WING.There is a type of supply of Single.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer consists of 2 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.There are 4 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.It consumes 2mA current of multiplexer ic without external influences.This multiplexer is equipped with 8 inputs and 8 outputs.The switches packaging is based on TR.With a resistance of 4.5Ohm, it operates.
SN74CB3Q3253PWRE4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3Q3253PWRE4 Applications
There are a lot of Texas Instruments SN74CB3Q3253PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Recording transmission
- Memory chips
- Logic circuits
- Automatic health monitoring systems
- Speed control of medern motors
- Memory system of computers
- Control unit of Central Processing unit (CPU)
- RF-based home automation system
- Microprocessor instruction decoding
