SN74CB3Q3253PWRG4
| Parameters | |
|---|---|
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 4.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CB3Q3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Bits | 2 |
| Propagation Delay | 6.7 ns |
| Quiescent Current | 2mA |
| Turn On Delay Time | 6.7 ns |
SN74CB3Q3253PWRG4 Overview
For the purpose of saving board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74CB series can be used in a wide range of applications.Its basic configuration includes terminations in the 16 range.The part number for 74CB3Q3253 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 2.5V voltage.This turn signal switch consists of 16 component pins.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.The board has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer provides 2 bits.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order for the turn signal switch to work, there are 4 outputs.This is an the digital switch ic that is classified as Other Logic ICs.No external influence consumes 2mA current of multiplexer ic.This multiplexer has 8 inputs.A TR packaging method is used in the switches.A resistance of 4.5Ohm is used to operate it.
SN74CB3Q3253PWRG4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3Q3253PWRG4 Applications
There are a lot of Texas Instruments SN74CB3Q3253PWRG4 Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Small scale TV wall
- Video transmission
- VGA
- Data transfer
- Seven segment displays
- Data-routing applications
- Combinational circuit
- PCIe
- Data communication
