SN74CB3Q3257DBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 9Ohm |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CB3Q3257 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Operating Supply Current | 1.5mA |
| Number of Bits | 4 |
| Throw Configuration | SPDT |
| Propagation Delay | 200 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 6.5 ns |
| Family | CB3Q/3VH/3C/2B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Power Supply Current-Max (ICC) | 0.7mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q3257DBQR Overview
As a means of saving space, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Multiplexer/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CB series, they can be used in a wide variety of applications.There are 16 terminations included in its basic configuration.The base part number is 74CB3Q3257, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 2.5V voltage.Signal switch has 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is used as its supply type.This multiplexer ic has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of CB3Q/3VH/3C/2B members.There are 4 bits signal multiplexer provides.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.The turn signal switch has 2 outputs.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.The switches packaging is based on TR.With a resistance of 9Ohm, it operates.In a load with a supply voltage of 1.5mA, stability of the multiplexers can be maintained.
SN74CB3Q3257DBQR Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 1.5mA
SN74CB3Q3257DBQR Applications
There are a lot of Texas Instruments SN74CB3Q3257DBQR Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Data transfer
- Combinational circuit
- VGA
- Data bus control
- Code conversion
- Data collection system
- Steel plants
- Data demultiplexing
- Memory system of computers
