SN74CB3Q3257PW

16 Terminations2.3V~3.6V 16 Pin 74CB3Q3257 Signal switch74CB Series 2 Outputs4 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3Q3257PW
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 826
Description: 16 Terminations2.3V~3.6V 16 Pin 74CB3Q3257 Signal switch74CB Series 2 Outputs4 Functions(Kg)

Details

Tags

Parameters
Number of Bits	4
Propagation Delay	200 ps
Quiescent Current	1.5mA
Turn On Delay Time	6.5 ns
Family	CB3Q/3VH/3C/2B
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	500MHz
Max Frequency	500MHz
High Level Output Current	-64mA
Low Level Output Current	64mA
Power Supply Current-Max (ICC)	0.7mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Drain to Source Resistance	4Ohm
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Multiplexer/Demultiplexer
Resistance	4Ohm
Subcategory	Other Logic ICs
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Base Part Number	74CB3Q3257
Pin Count	16
Number of Outputs	2
Circuit	4 x 2:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Operating Supply Current	1.5mA

SN74CB3Q3257PW Overview

Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tube.For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Since they are members of the 74CB series, they can be used in a wide variety of applications.Among its basic features are 16 terminations.As its base part number is 74CB3Q3257, logic switch can also be used to find its related parts.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.Currently, it is configured with 16 pins.It is mounted in the way of Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.The multiplexer ic provides 4 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.Avoid unnecessary failures by keeping Vsup at 3.6V.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.As part of the operation of this turn signal switch, there are 2 outputs.The part belongs to the Other Logic ICs category of signal switches.Without any external influences, it consumes 1.5mA current of multiplexer ic at all times.The multiplexer is equipped with 8 inputs.The system operates with a resistance of 4Ohm.If the load is supplied with a voltage of 1.5mA, stability of the multiplexers can be maintained.

SN74CB3Q3257PW Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 1.5mA