Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Weight |
39.008944mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Bus Switch |
Resistance |
9Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO OPERATES WITH 3.3V SUPPLY |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TUBE |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CB3Q3305 |
Pin Count |
8 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Channels |
2 |
Number of Ports |
2 |
Nominal Supply Current |
250μA |
Output Current |
30mA |
Number of Bits |
1 |
Propagation Delay |
150 ps |
Quiescent Current |
700μA |
Turn On Delay Time |
5 ns |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
500MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.09 ns |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Power Supply Current-Max (ICC) |
0.7mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CB3Q3305PWG4 Overview
Digital switch is provided in the 8-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is in the form of Tray.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74CB series can be used in a wide range of applications.As parts of its basic configuration, 8 terminations are desgined.You can also find related parts by using its logic switch base part number of 74CB3Q3305.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch contains 8 component pins.As a result, GULL WING represents the end of the conductors.There is a supply type of Single employed as part of this supply.A configuration of 8 pins is used.It is mounted in the way of Surface Mount.In the signal multiplexer, there are 1 bits available.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.It consumes 700μA current of multiplexer ic since it is not affected by external factors.The switches package is packaged in accordance with the TUBE method.A resistance of 2 governs its operation.The system operates with a resistance of 9Ohm.A total of 2 channels are used for transmission in the turn signal switch's circuit.Additionally, ALSO OPERATES WITH 3.3V SUPPLY provides improved characteristics.In order to provide greater switches' flexibility, 30mA is provided as the output current.
SN74CB3Q3305PWG4 Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
ALSO OPERATES WITH 3.3V SUPPLY
SN74CB3Q3305PWG4 Applications
There are a lot of Texas Instruments SN74CB3Q3305PWG4 Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- Make full adder
- Solenoid cooling fan
- Small scale TV wall
- HDMI applications
- Relay
- Frequency multiplexing system
- Automatic health monitoring systems
- Electronically controlled engine system
- Audio transmission