SN74CB3Q3305PWRG4

8 Terminations2.3V~3.6V 8 Pin 74CB3Q3305 Signal switch74CB Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3Q3305PWRG4
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 487
Description: 8 Terminations2.3V~3.6V 8 Pin 74CB3Q3305 Signal switch74CB Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Weight	39.008944mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Bus Switch
Resistance	9Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES WITH 3.3V SUPPLY
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74CB3Q3305
Pin Count	8
Qualification Status	Not Qualified
Circuit	1 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Number of Channels	2
Number of Ports	2
Nominal Supply Current	250μA
Output Current	30mA
Number of Bits	1
Propagation Delay	150 ps
Quiescent Current	700μA
Turn On Delay Time	5 ns
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	500MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.09 ns
High Level Output Current	-64mA
Low Level Output Current	64mA
Power Supply Current-Max (ICC)	0.7mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CB3Q3305PWRG4 Overview

The reason it is provided is that the board space can be saved by placing digital switch in the 8-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.The multiplexers from 74CB series can be used for a wide range of applications.As part of its basic configuration, 8 terminations are designed as a part of it.You can also find related parts by using its logic switch base part number of 74CB3Q3305.In this case, 2.5V is the voltage supplied to the multiplexer's system.A component pin count of 8 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.A configuration of 8 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The multiplexer ic provides 1 bits.Avoid unnecessary failures by keeping Vsup at 3.6V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 700μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.The signal switching operates with a resistance of 2.It operates with a resistance of 9Ohm.For transmission, there are 2 channels in the turn signal switch's circuit.In addition, it provides improved characteristics compared to ALSO OPERATES WITH 3.3V SUPPLY.There is an output current of 30mA that allows for greater switches' flexibility.