Parameters |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
9Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CB3Q3306 |
Pin Count |
8 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Channels |
2 |
Number of Ports |
2 |
Nominal Supply Current |
250μA |
Output Current |
30mA |
Number of Bits |
1 |
Propagation Delay |
200 ps |
Quiescent Current |
700μA |
Turn On Delay Time |
6.5 ns |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
500MHz |
Output Polarity |
TRUE |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Height |
900μm |
Length |
2.3mm |
Width |
2mm |
Thickness |
850μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-VFSOP (0.091, 2.30mm Width) |
Number of Pins |
8 |
Weight |
9.610488mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
SN74CB3Q3306ADCUR Overview
Providing this information in the 8-VFSOP (0.091, 2.30mm Width) enables digital switch board space to be saved.The package is in the form of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.The multiplexers can be used for a wide range of applications since they are members of 74CB series.Among its basic features are 8 terminations.The part number for 74CB3Q3306 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 2.5V is supplied.In this turn signal switch, there are 8 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.This multiplexer ic has 8 pins configured.It is mounted in the way of Surface Mount.In the signal multiplexer, there are 1 bits available.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.It consumes 700μA current of multiplexer ic without external influences.The signal switching is packaged by TR. 2 is the resistance at which it operates.In terms of resistance, it has a value of 9Ohm.This turn signal switch's circuit is based on a circuit with 2 channels.For increased switches' flexibility, the output current of 30mA is provided.
SN74CB3Q3306ADCUR Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
SN74CB3Q3306ADCUR Applications
There are a lot of Texas Instruments SN74CB3Q3306ADCUR Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- Microprocessor instruction decoding
- CNC machines
- Data bus control
- Automatic Monitoring systems
- GLAN
- Analog to digital conversion
- Audio transmission
- PCIe
- Transmission from the computer system of a satellite