SN74CB3Q3306APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CB3Q3306 |
| Pin Count | 8 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 2 |
| Number of Ports | 2 |
| Nominal Supply Current | 250μA |
| Output Current | 30mA |
| Number of Bits | 1 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 700μA |
| Turn On Delay Time | 200 ps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3Q3306APW Overview
In order to save board space, digital switch is located in the 8-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As a member of 74CB series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 8 terminations are desgined.There is a base part number of 74CB3Q3306 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch consists of 8 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.Currently, it is configured with a 8 pin configuration.This unit is mounted in the way of Surface Mount.In this signal multiplexer, there are 1 bits that are provided.Keeping Vsup at 3.6V will prevent some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceiver.Without any external influences, it consumes 700μA current of multiplexer ic at all times.The signal switching operates with a resistance of 2.A resistance of 5Ohm is used to operate it.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.It is possible to provide a current output of 30mA for greater switches' flexibility.
SN74CB3Q3306APW Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3Q3306APW Applications
There are a lot of Texas Instruments SN74CB3Q3306APW Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Enabling different functions units in microprocessor instruction decoding
- Logic gates for other digital devices
- Telephone network
- Make half adder
- Data communication
- Decimal decoder
- CNC machines
- PCIe
- Frequency multiplexing system
