SN74CB3Q3306APWR

8 Terminations2.3V~3.6V 8 Pin 74CB3Q3306 Signal switch74CB Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3Q3306APWR
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 687
Description: 8 Terminations2.3V~3.6V 8 Pin 74CB3Q3306 Signal switch74CB Series 2 Functions(Kg)

Details

Tags

Parameters
Series	74CB
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Bus Switch
Resistance	9Ohm
Subcategory	Bus Driver/Transceiver
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Base Part Number	74CB3Q3306
Pin Count	8
Output Voltage	5.5V
Circuit	1 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Number of Channels	2
Number of Ports	2
Output Current	30A
Max Supply Current	700μA
Number of Bits	1
Throw Configuration	SPST
Propagation Delay	6.5 ns
Quiescent Current	700μA
Turn On Delay Time	6.5 ns
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	500MHz
Nominal Input Voltage	1.7V
High Level Output Current	-64mA
Low Level Output Current	64mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Drain to Source Resistance	4Ohm
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Weight	39.008944mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)

SN74CB3Q3306APWR Overview

This is a relatively small item of digital switch that is included in the 8-TSSOP (0.173, 4.40mm Width) in order to save space on the board.In this case, it is packaged as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74CB series, which provide extensive application potential.As part of its basic configuration, 8 terminations are designed as a part of it.Its logic switch base part number is 74CB3Q3306 which can also be used to find its logic switch related parts.For multiplexer's system, 2.5V voltage is supplied.Currently, this turn signal switch has a total of 8 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.This multiplexer ic has 8 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In the signal multiplexer, there are 1 bits available.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceiver.It consumes 700μA current of multiplexer ic without external influences.TR is used to package the switches.A resistance of 2 is used to operate the signal switching.With a resistance of 9Ohm, it operates.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.For higher switches' flexibility, the output current is set to 30A.