SN74CB3Q3345DBQR

20 Terminations2.3V~3.6V 20 Pin 74CB3Q3345 Signal switch74CB Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3Q3345DBQR
Package: 20-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 892
Description: 20 Terminations2.3V~3.6V 20 Pin 74CB3Q3345 Signal switch74CB Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.154, 3.90mm Width)
Number of Pins	20
Weight	125.786834mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	20
ECCN Code	EAR99
Type	Bus Switch
Resistance	9Ohm
Additional Feature	ALSO OPERATES WITH 3.3V SUPPLY
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.635mm
Base Part Number	74CB3Q3345
Pin Count	20
Circuit	8 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Ports	2
Nominal Supply Current	700μA
Output Current	30mA
Number of Bits	8
Throw Configuration	SPST
Propagation Delay	7.7 ns
Quiescent Current	2mA
Turn On Delay Time	7.7 ns
Family	CB3Q/3VH/3C/2B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	500MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.2 ns
High Level Output Current	-64mA
Low Level Output Current	64mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.75mm
Length	8.65mm
Width	3.9mm
Thickness	1.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CB3Q3345DBQR Overview

In order to save board space, digital switch is located in the 20-SSOP (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the method of Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74CB series, which provide extensive application potential.The basic configuration includes 20 terminations.To find signal switch's related components, a base part number of 74CB3Q3345 may also be used.The multiplexer's system works with 2.5V voltage.Currently, this turn signal switch has a total of 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 20 pins.The mounting point is Surface Mount.The logic switch belongs to the family of CB3Q/3VH/3C/2B.Signal multiplexer contains 8 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.No external influence consumes 2mA current of multiplexer ic.In accordance with TR, switches can be packaged.A resistance of 2 is used to operate the signal switching.9Ohm is the resistance at which it operates.In addition, ALSO OPERATES WITH 3.3V SUPPLY provides improved characteristics.The output current of 30mA is provided for higher switches' flexibility.