SN74CB3Q6800PWG4
| Parameters | |
|---|---|
| Weight | 89.499445mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 9Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 750μA |
| Current - Output | 30mA |
| Number of Bits | 10 |
| Propagation Delay | 225 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 8.5 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
SN74CB3Q6800PWG4 Overview
In order to save board space, digital switch is located in the TSSOP.As a result, it is packaged in the way of Rail/Tube.Among its basic configurations are 24 terminations.The multiplexer is supplied with 2.5V voltage.There are 24 component pins in this turn signal switch.As the end of conductors, it uses GULL WING.Single is used as its supply type.The board has 24 pins configured.The mount is in Surface Mount.The logic switch object belongs to the family of CB3Q/3VH/3C/2B.The multiplexer ic provides 10 bits.In order for 2.5/3.3V to operate normally, a power supply is provided.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 2mA current of multiplexer ic since it is not affected by external factors.With a resistance of 0, it operates.It operates with a resistance of 9Ohm.In this case, operating this signal switch at 85°C is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.The device is specified to operate at a maximum supply voltage of 3.6V in accordance with the applicable device specification.A minimum supply voltage of 2.3V is specified for the digital swith in accordance with its applicable specifications.Additionally, ALSO OPERATES AT 3.3V SUPPLY has improved characteristics.In order to implement its logic, it makes use of IC BUS DRIVER.
SN74CB3Q6800PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY
BUS DRIVER as the logic IC
SN74CB3Q6800PWG4 Applications
There are a lot of Texas Instruments SN74CB3Q6800PWG4 Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- Combinational circuit
- Data communication
- Relay
- HD surveillance system
- Data demultiplexing
- Make half adder
- VGA
- Used to connect a single source to multiple destinations
- CNC machines
