SN74CB3T16211DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 9.5Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CB3T16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 70μA |
| Output Current | 64mA |
| Number of Bits | 12 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 70μA |
| Turn On Delay Time | 12 ns |
| Family | CB3T/3VT |
| Number of Inputs | 24 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.07mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T16211DGGR Overview
As a means of saving space, digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width).In this case, it is packaged as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74CB series can be used in a wide range of applications.This configuration includes 56 terminations as part of its basic functionality.The base part number is 74CB3T16211, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 2.5V.This turn signal switch has 56 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic has 56 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CB3T/3VT family.As a result, signal multiplexer provides a total of 12 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 70μA current of multiplexer ic.It is provided with 24 inputs.The switches package is packaged in a way which is consistent with TR.With a resistance of 0, it operates.A resistance of 9.5Ohm is used to operate the signal switching.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CB3T16211DGGR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
SN74CB3T16211DGGR Applications
There are a lot of Texas Instruments SN74CB3T16211DGGR Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Automatic Monitoring systems
- Computer memory
- PCIe
- Injectors
- A robotic vehicle with the metal detector
- Signal router
- Arithmetic Logic Units
- Code conversion
- Medium scale TV wall
