SN74CB3T16211DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 9.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CB3T16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 70μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 12 ns |
| Quiescent Current | 70μA |
| Turn On Delay Time | 12 ns |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.07mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T16211DGVR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 56-TFSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.Multiplexers of the 74CB series can be used in a wide range of applications.As parts of its basic configuration, 56 terminations are desgined.To find signal switch's related components, a base part number of 74CB3T16211 may also be used.The multiplexer's system is powered by 2.5V volts.Signal switch has 56 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.With 56 pins, it is configured.Surface Mount is the way it is mounted.The CB3T/3VT family includes the logic switch.Signal multiplexer consists of 24 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.Bus Driver/Transceivers is a category for the digital switch ics.It consumes 70μA current of multiplexer ic since it is not affected by external factors.The switches package is packaged in accordance with the TR method.This signal switching operates at a resistance of 2.A resistance of 9.5Ohm is used to operate the signal switching.For higher switches' flexibility, 64mA is provided as an output current.
SN74CB3T16211DGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3T16211DGVR Applications
There are a lot of Texas Instruments SN74CB3T16211DGVR Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Code conversion
- Night vision cameras
- Time division multiplexing system
- Data demultiplexing
- Automation system
- To select different devices in microprocessor input
- Data-routing applications
- Enabling different functions units in microprocessor instruction decoding
- HD surveillance system
