SN74CB3T16211DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 9.5Ohm |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CB3T16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 70μA |
| Output Current | 64mA |
| Number of Bits | 12 |
| Propagation Delay | 12 ns |
| Quiescent Current | 70μA |
| Turn On Delay Time | 12 ns |
| Family | CB3T/3VT |
| Number of Inputs | 24 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.07mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T16211DL Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 56-BSSOP (0.295, 7.50mm Width).Tube is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.The multiplexers can be used for a wide range of applications since they are members of 74CB series.As part of its basic configuration, 56 terminations are designed as a part of it.As its base part number is 74CB3T16211, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 2.5V is supplied.A component pin count of 56 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.Its supply type is Single, which is used as the source of power.There are 56 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CB3T/3VT family.Signal multiplexer contains 12 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.In the absence of external influences, it consumes 70μA current of multiplexer ic.It is provided with 24 inputs.This signal switching operates at a resistance of 2.With a resistance of 9.5Ohm, it operates.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CB3T16211DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CB3T16211DL Applications
There are a lot of Texas Instruments SN74CB3T16211DL Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- To select different devices in microprocessor output
- Audio transmission
- A/D converters
- Make half adder
- Electronically controlled engine system
- Combinational circuit
- Paper plants
- Logic gates for other digital devices
- VGA
