SN74CB3T16211DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Resistance | 9.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 56 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 70μA |
| Current - Output | 64mA |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Quiescent Current | 70μA |
| Turn On Delay Time | 12 ns |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Length | 18.415mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CB3T16211DLG4 Overview
As a means of saving space, digital switch is provided in the SSOP.It is packaged according to the Rail/Tube method.Among its basic features are 56 terminations.For multiplexer's system, a voltage of 2.5V is supplied.A component pin count of 56 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply of Single.Currently, it is configured with a 56 pin configuration.It is positioned in the direction of Surface Mount.The logic switch is a member of the CB3T/3VT family.The multiplexer ic provides 24 bits.Bus Driver/Transceiver is the classification for this the digital switch ic.Without any external influences, it consumes 70μA current of multiplexer ic at all times.The system operates with a resistance of 2.A resistance of 9.5Ohm is used to operate it.The signal switch can operate at a maximum temperature of 85°C.A temperature of the multiplexer of -40°C should be maintained for minimal operation.The device is specified to operate at the maximum supply voltage of 3.6V in accordance with its applicable specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.3V.As its logic IC, it uses BUS DRIVER.
SN74CB3T16211DLG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
SN74CB3T16211DLG4 Applications
There are a lot of Texas Instruments SN74CB3T16211DLG4 Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Memory chips
- Electronically controlled engine system
- Microprocessor instruction decoding
- Solenoid cooling fan
- Combinational circuit
- GLAN
- Night vision cameras
- Steel plants
- Textile mills
