Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
9.5Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CB3T16211 |
Pin Count |
56 |
Circuit |
12 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Ports |
2 |
Nominal Supply Current |
70μA |
Output Current |
64mA |
Number of Bits |
24 |
Throw Configuration |
SPST |
Propagation Delay |
12 ns |
Quiescent Current |
70μA |
Turn On Delay Time |
12 ns |
Family |
CB3T/3VT |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
100MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.07mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
18.41mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CB3T16211DLR Overview
This is a relatively small item of digital switch that is included in the 56-BSSOP (0.295, 7.50mm Width) in order to save space on the board.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CB series can be used in a wide range of applications.The basic configuration of this system includes 56 terminations.In addition, it also has a base part number of 74CB3T16211, which can be used to find related parts.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemThis turn signal switch has a total of 56 component pins.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.The board is configured with 56 pins.It is mounted in the way of Surface Mount.The CB3T/3VT family includes the logic switch.In the signal multiplexer, there are 24 bits available.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 70μA current of multiplexer ic.Currently, the switches is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.As far as the resistance is concerned, it operates with 9.5Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CB3T16211DLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CB3T16211DLR Applications
There are a lot of Texas Instruments SN74CB3T16211DLR Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Data distribution
- Transmission from the computer system of a satellite
- War field flying robot with a night vision flying camera
- GLAN
- Microprocessor memory systems
- Encrypted communications system
- Home automation system
- CNC machines
- Enabling block of memory depending on address in memory chips